clarky_920
Member
hey i just wanna know the EXACT measurements for 1 piece home made bars
and what type of metal should i use?
and what type of metal should i use?
1 piece bars
- Thread starter clarky_920
- Start date
Eat Joo Food
Member
4130 chromoly is pretty strong. you should use that because its light and strong at the same time. get the stuff on the sticky by brian boston called Scooter Modding Super Thread.
All i know is that the crossbars outer diamater is 7/8.
his forum with the measurments is on the sticky.
All i know is that the crossbars outer diamater is 7/8.
his forum with the measurments is on the sticky.
jonny scoot
Member
R-y-a-n said:
scooterkris
Member
these sizes are good for steel, too thin for cromo.
steerer tube:
wall thickness = thin gauge/light gauge/1.6mm thick
OD = 31.8mm or 1 1/4"
ID = 28.6mm or 1 1/8"
Crossbar:
wall thickness = thin gauge/light gauge/1.6mm
OD = 22.2mm or 7/8"
ID = 19mm or 3/4"
these are the sizes i used to make my one piece bars and they turned out pretty good.
steerer tube:
wall thickness = thin gauge/light gauge/1.6mm thick
OD = 31.8mm or 1 1/4"
ID = 28.6mm or 1 1/8"
Crossbar:
wall thickness = thin gauge/light gauge/1.6mm
OD = 22.2mm or 7/8"
ID = 19mm or 3/4"
these are the sizes i used to make my one piece bars and they turned out pretty good.
russian serjey
Member
hahahahahahahahahahaha roflmao hahahahahahah...n0000000b
Mario Rocchio
Steel Member
no, its about the same strenfth, just lighter.
calknowles
Member
dont bolt it weld it deerrr
Nick Morland
Member
William said:
gerkin of honour
Member
SEARCH, NOOB!
DavidMiles47
Steel Member
you guys are fuckin dicks. not even half of you can call anybody a noob for real.
and serjey you can barely type a full sentence. lay off him
at least some people were nice enough to help out
and serjey you can barely type a full sentence. lay off him
at least some people were nice enough to help out
Nick Morland
Member
david he should have search theres like a billion threads on this and i even did one a while bak and he is a noob
DavidMiles47
Steel Member
yeah and so did i and i got helpful responses before this place was flooded with retards. and does it really annoy you guys sooo much that he made a thread instead of searching? geez
Nick Morland
Member
yes it anoying cus it wastes bandwidth.
scooterkris
Member
ok, lets get one thing straight. cromolly and steel are 2 different metals. cromolly is lighter than steel but not as strong. cromolly is only a tiny bit weaker than steel. i said that the cromolly would be too thin for the sizes i used because my friend had some homemade one pieces that were made of cromolly that were the same size as mine and his bent.