ADA chromoly crossbar thing

gil_

gil_

Steel Member
could u just get one of those and bolt it into a stock t tube like the same idea wit htrolley bars except with that bar?
 
the_SD_local

the_SD_local

I own SR.
Yes and no. I just went out and test fit a pair of bars...

It is an incredibly tight fight so it won't work unless you spend a little time sanding out the inside of the T tube. Also, the layer of paint on the cross bar adds quite a bit of thickness as well so you might have to strip the paint off as well.

I could also sell a "paint-less" version to save you and I the trouble with the paint but you would still have to spend a little time sanding to get it to fit right.

It is possible but it's not just going to slide right in with ease if that's what you are looking for BUT it will fit a lot better and tighter if you take the time to do it right.
 
C

Chuck

Member
ahhaha.

andrew will other goped stems work? b/c theres like 538985475478 of them out there and soem look cooler etc. if there right size should they fit?
 
the_SD_local

the_SD_local

I own SR.
Chuck Norris said:
ahhaha.

andrew will other goped stems work? b/c theres like 538985475478 of them out there and soem look cooler etc. if there right size should they fit?
Click to expand...
Anything should fit IF it is the right size... but I doubt those Go-Ped stems are the right size. I don't know that for a fact though but I'm like 97.326% sure they are too small.
 
S

Steezeman

Administrator
Clamps off of Goped Race bars will NOT work, they are way too big. And the ones that go on the normal bars would fit about the size of your fork, because that's how big stock Goped bars are.
 
You must log in or register to reply here.
Top