grips?

TUC

Member
well dpending on what you used to adhere them to the bar you could possibly roll them off but they dont usually work aswell once you try putting them on another set of bars because they are all stretched out already...
 

ktmfmx

Member
use crc or sum light spray lube and shove a screw driver under it and spray the crc or wat ever in ther and u can just pull em straight off
 

D4NI8L0

Member
put the needle of an air compressor inbetween the bars and grips and turn it on. they slide right off
 

Zaηe

Keepin' Peace
Staff member
You dont need anything to put them on or take them off.

To take off, pull and twist tons so that it comes off about 2-3 cm (half an inch).
Then just roll them up so they roll off and then unroll them once there off.

To put on, just put them on as far as you can, then, just tap them on, the air compression made by your hand can get them on pretty damn fast sometimes.
1 tap for me once. Straight on.
 

Hogan

Member
ya use a compresor if u dont have one u can use a can of air just put on as far as u can then put the needle under and they slide right on
 
Top