Help me please!!!

[Nate_Robertson]

ok when i ride sometimes after i land a trick and i push slightly forward on my bars i feel a little crack i tighten my hic as tight as it will go without it being to tight and it still does it do u think its my crappy lucky plactic hic?

 

[702_dialed_rider]

check for cracks in every thing and tighten the headset all the way it might feel wrong w/o the bars on but when you put them on it will be perfect

 

[Michael Osterlund]

grease your headset, if it is new, it will have to be broken in. use wd40 and spray it in the headset.

 

[Chris36]

dont put wd 40 in your headset most companies dont put much grease in the head set wd 40 is a degreaser so your head set would last half as long put marine grease in there that shit is thick and make your head set feel like butter

 

[tyler_magro]

could be that your crown race is loose...

 

[Broccoli1]

STAY AWAY FROM WD-40​

WD-40 is not a lubricant- it gives a sense of lubricaton because it breaks down the existing Lubricant that is on the part and makes everything slippery.

You can use it to CLEAN bearings but you need to replace the Lubricant that you have just cleaned off.

Here is a pretty good breakdown for cleaning bearings.

http://www.bikeradar.com/gear/article/workshop-servicing-your-bearings-18623/

 

[joshbeattie]

i think i might have the same problem, mine kinda creeks though, if you fix yours could you post how, it would be a massive help

cheers