Stretching clamps to fit buffs

[mitch_w]

how do you do that somebody please help me out

 

[JDBen]

try putting the bolt through the wrong way and screw it in

 

[jonnyq]

try putting the bolt through the wrong way and screw it in

wow dude that was utterly terrible.

put the bolts in backward and put a penny ( i had to use 3 quarters) in the clamp so when you screw in the bolts it pushes against the penny and streches the clamp

 

[JDBen]

try putting the bolt through the wrong way and screw it in

wow dude that was utterly terrible.

put the bolts in backward and put a penny ( i had to use 3 quarters) in the clamp so when you screw in the bolts it pushes against the penny and streches the clamp

Peter just fuck off man I'm trying to help him!!!!!!

I just want to kill you. If I ever do get buffs, I won't bother putting them on my scooter, I'll just be whacking your fucking brain out and spreading your guts all over over the pavement with them!!!!!

 

[Madis]

Again you two. This is my last warning. Keep your anger under control and use it against each other in MSN or AIM. This kind of flooding must stop.

 

[MattThomMakesMeWarmInside]

or you could get 2 vice grips and straightly pry them apart (after bolt is taken out obviously) and then clamp it back so its fits the bars and screw in. OR take a vice grip and put in something big like a hammer at an angle and push down to bend it out then clamp it back together on the bars. With vice grips you don't need creativity.

 

[JonnyJonDogg]

do the penny thing thats the best way

 

[Joe Riley]

and you can mess up then screwed for a clamp like me. luckily i have 7 more.

 

[ErikHoward]

penny way it takes 5 seconds screw the screw backwards(were the threading is)then put pennys then tighten them with a allen wrench