Stripped starnut threads (SCS)

[scooterluv11]

I stripped my starnut threads and the bolt is stuck inside. I used red lock tight and i did not know whaty that would do so know th threads are striped and when i move it it stays in place. So................. how do i get it out???

 

[Jacob2195]

do you have the proto star compression cap inside? if you do take a screw driver and break the "spokes" and the your scs should come off and then try to drill the starnut out, if you dont have the proto cap then.... just beat the shit out of the compression cap.

 

[Tony Ebbert]

If it's a stripped STARNUT then you trying to get it out should rethread it and it should come off. Or if the starnut is completely stripped the bolt should come out rather easily. Get me if I'm wrong?

 

[Jon.]

Hermmm uhh maybe get some really hot rod and melt the side of the starnut till you can get it out easy.

 

[Justin Vogelsberger]

take your wheell off get a long drill bit and drill it out

 

[Kevin Lo]

Drill out the top of the compression cap bolt until it breaks and pull the fork out

 

[Rob.]

AHAHAH RED LOCKTITE. That shit will never come off I think you have to beat the shit out of the outer part until the threaded part comes out, then beat another starnut in.

 

[edy boi]

just hammer the old starnut down with a srew driver or something and put a new one in, /thread

 

[mattyts]

How much of the red locktite shit did you use?i use it but like half a drop

 

[michaelchavez]

ok so i have the same problem but dont wanna start new thread.
so i was untightening my scs for a total of like 45 mins and it wudnt come off. but when i tightened it it would actually tighten a lil bit. so my friend said to get to cars, tie ropes to one car and the fork and another one to the scs and another car but i dont wanna do that. any other methods? plz i need help

 

[michaelchavez]

^&^^^bump

 

[michaelchavez]

bump

 

[Jon.]

what are you smoking?

 

[Drew Kelly]

haha if you want the fork off stretch it

 

[ConnorD]

ok so i have the same problem but dont wanna start new thread.
so i was untightening my scs for a total of like 45 mins and it wudnt come off. but when i tightened it it would actually tighten a lil bit. so my friend said to get to cars, tie ropes to one car and the fork and another one to the scs and another car but i dont wanna do that. any other methods? plz i need help

I'm sure I'm not the only one to think it, but what the hell are you talking about? I would not bring cars into the situation to take apart a friggin scooter.

 

[Creative]

deff use the cars. and tape it