110mms dont fit on a pro model?

[Alex566]

I just got my 110 yaks and they dont fit on my pro model..is there any way to make them fit?

 

[Pete Pachota]

take off the plastic cap that covers the bottom of the fork tube.

 

[Alex566]

ok but the back wheel still kinda touches the brake..should i take a new a brake and put it on instead?
oh and what should i use to take the plastic cap off?

 

[Brian Boston]

Andrew said to take the brake off, sand the deck in a little bit, and put the brake back on and it will be a little higher i think? I just took a rubber hammer and hit the brake a few times with it and it was ok, not reccomended though.

 

[Alex566]

k but how do i take the plastic cap off the fork?

 

[CodyChirichiello]

If you are talking about what i think you are talking about, i am pretty sure you can use a flat head screwdriver.

 

[Alex566]

i've been using one but i cant get it off..and i just bent the brake sideways now lol

 

[b1pro]

Another way to get the cap off is to find aomething round that can slide into the fork then use a hammer to pound it down onto the plastic part and *BAM* it should come out.

 

[rapzilla223]

told ya to take the fork off alex lol, but idk if thats the only way u might as well try it

 

[ojfross]

haha this is weird because i had kc come over and help me with my scooter because i can only really use one arm but what he die was take off my fork and put a t tube in it and just slamed the t tube into the ground and the plug shot out and i was talking to tyler boner about the back and was all like wtf haha but i just took off the wheel and bent the break back with pipe wrench

 

[jakob-b]

wat a funny question haha lol

 

[javier muro5]

i just take the plastic cap on the fork and then just switch the brake from the pro madel to another one cause pro model barke suck they baend and it should fit

 

[Alex566]

i got the front wheel but now im having problems with the back one..it still touches the brake me and my friend tried bending it but it didnt really work

 

[jakob-b]

listen to javier

 

[Alex566]

i did i switched it to a new a brake and it didnt fit so we tryed bending it and it didnt work

 

[Kevin Vannauker]

what i did about the brake was just ride it for a bit, the wheel will eventually get smaller.

 

[Kenny O.]

yeah the wheel will wear down so it will fit

 

[Alex566]

ok ill try it but the wheel doesnt roll at all when i try to ride

 

[Steven_T]

I love readin Alex's post...there funny..but annyyways. This really shouldnt be that tough for you bud. Its not to hard to bend the brake back with a wrench or something...or jes switch to brake with an Old A Brake or Any other brake that will fit...

 

[Alex566]

k i got it i just had to wear the wheel down a little thanks every1