Back axel wont come out

A

Alex566

Member
ok im going to clean my bearings so im taking my wheels off and i cant get the back one off, i can get the bolt thing out but the axel just sits in there i think i might of bent it or somthin but i cant get it out any help?
 
A

AX3D

Member
Thats what happned with me but it was on the Fork, it was just some crap bearings and a crap weel so I just left it there. It wont come out unless I cut it, I hammerd it and tryed pretty much everything I can think of.
 
A

Alex566

Member
i would just keep it there but the bearings are all gritty and i cant stand it lol and there super swiss 6 so i dont really wanna not clean em lol
 
S

Steezeman

Administrator
Get some WD-40 or something. Is the screw stuck screwed in or is that bolt stuck in the hole? I'm thinking it's the bolt, so just bust out the hammer.
 
Matt Dibble

Matt Dibble

M3MB3R
Staff member
take a flathead screwdriver and put it right near the edge of the side of the bolt that you want to come out (sounds way more confusing than it is) then just tap it a few times with a hammer to get it under, then pry it out. Also if you have the right sized allen wrench or allen key then you can stick it in the other end and tap it with a hammer and if its the right size it wont get stuck in the threads of the bolt but still fit!

getting a bolt out by dibble have a nice day
 
Matt Dibble

Matt Dibble

M3MB3R
Staff member
Alex566 said:
i used a flat head and it finally got it out but it was mad hard..
Click to expand...


!amazed !amazed !amazed !amazed !amazed !amazed
My idea.
!amazed !amazed !amazed !amazed !amazed !amazed
 
You must log in or register to reply here.
Top