Bar spin issues on pro models

Manzie

Manzie

Steel Member
on my pro, ive got this bloody annoying issue, were the bloody handle brs will only spin around once, wont go any further. Also, after a night in my cold garage it get all stiff. anyone had this problem? anyway to fix it? Or should i just get a new one. :?
 
A

Australiano

Member
Check out the mod bible, its a sticky on the top of the page(scooter forum) and if theres nothing in there you should really unscrew your handlebars, unscrew the 2 nut like things a LITTLE BIT this will make them spin better, if that doesnt work pull the headset apart and clean everything then oil the bearings.
 
brandon kilbury

brandon kilbury

Super Moderator
a lot of people have told me that bmx headsets arent any faster, just smoother...and stock headsets are fast and smooth if you oil them. get some triflow, make sure the nuts arent crushing the bearings and when you get everything exactly how you want it, wrap electical tape around both bolts and the clamp at the bottom of the steer tube, that way the nuts wont come loose or tighten up randomly
 
G

gorrilaman

Member
My BMX headset is super fast. I actually only was able to spin my razor stock headset half a round lol. Try cleaning up the headset the whipscooter way or just get a BMX headset.
 
R

rimroxxrailer

Member
try losening ur headset caps thingy\'s a little holding it on( dont know what theyre called) itll make it rock a little bit but not enough to notice while riding.... or u could always get a bike headset...
 
F

farmboy uk

Steel Member
they are faster normally

unless you make your stock run lush like do the whip scooters thing and clean it loads i don't think it should be as fast
 
J

jakob-b

Member
gorrilaman said:
My BMX headset is super fast. I actually only was able to spin my razor stock headset half a round lol. Try cleaning up the headset the whipscooter way or just get a BMX headset.
Click to expand...



there not thta much faster you barely can noticest the differnce
 
S

Snow Patrol

Member
eric magray said:
farmerRIP Irwin said:
...unless you make your stock run lush...
Click to expand...
who would fix up a stock headset to make it better
Click to expand...

I would

just get something to wipe ALL the grease out in the cups the fork and the bearings, then put it back together.
You could put oil in it, but i never do and my bars will spin for over half a minute and still not wiggle or make any noises when i drop it.

Yes i tried headsets, but i really dont think it makes a difference, you just got to be really good with fixing stocks up.
 
J

JAM3S

Steel Member
When dean got his it happend aswell, but he just put some densobenite carbon acitate grease that he got from the boat shop to fix the problem with his headset, worked a bloody treat!!
 
You must log in or register to reply here.
Top