BOLTED FOLDY PROBLEMS.

[LuckyLittleGit]

Hey, im new to scootering and have just bolted my foldy.
the bolts were slighty small but fit perfect. It lasted for about a week. until i like bunnyhop or air on a quarterpipe my scooter makes an awful crutching noise at the folding mech? do i need to tigthen something.

P.S - I ride French ID!

 

[Joe Manson]

tighten the bottom bolt a bit more, and tighten the top one a bit more, dont tighten the middle to much incase the foldy bends

 

[humpurple kushiones]

bent foldy ftw if its to tight on the bottom it wil crack the welds

 

[take2industries]

it could be the frok , i had the same problem, but then i got smart and sold it, but it could also be the foldy or something

 

[smiles]

take the bolts out and put washers on each side of the bolts if you havent done that yet

 

[JonnyJonDogg]

yo where u live in england?

 

[Humma]

Washers, + tighten the top and bottom really tight

 

[redline582]

Make sure you have washers and tighten it all real tight.

 

[LuckyLittleGit]

Thanks Peeps. I haven't got washers just standard nut on the side of each bolt. i've tightened them and its alot better. Jondogg I live in Surrey Near london.

 

[AaronA]

just put a bigger bolt in the back