Buff Bar help please

[Eric Ainsworth]

I just got my buff bars and when i went to go put them on i quickly realized the pro model bar clamp is way too small. I looked at some of my mountain bike clamps and they were also to small. where can i find a clamp big enough to strap on my bars?

 

[humpurple kushiones]

you need to streach the clamp

 

[codyferner]

get a chisel or something that has a a wedge and hammer it in there
then slip it on the bars with the chisel still in the clamp

 

[JohnK]

Theres a Pinned Topic On how to make the clamp bigger

 

[blaine142]

ok what u need to do is stretch the bars by
taking two screwdrivers
and putting one on one side of the clamp and the other screw driver on the other and cross them so they should be making an x then u push down on the handles and it will stretch the clamp out. oh yea u need to take the bolts out of the clamp before this, and then put them on ur bars and if there to stretched and u can get the bolts from the clamp to line up u just hit the clamp back together with a hammer, understand?

 

[Eric Ainsworth]

oh alright thanks for the help.

 

[Dom Marconi]

i just came up with an easier way to do it. first you take the bolts out, and then you put like 2 dimes or something in between the slit in the clamp, and then you put the bolts on, but you put them in on the other side, so thtat the first hole they go in is the threaded one. then you tighten them so that instead of going through the other hole, they press against the dimes.and you keep tightening until it is big enough to slip on the bars. then you take everything out and put the bolts on the right way.