buff bar problem

K

kalen kress

Member
so i have buff bars and and regular stock pro model fork. When i put my bars on and tighten everything as tight as i can the bars still manage to wiggle. its very annoying to ride now.. ive tried to put duck tape it still didnt work
any ideas please share
 
Chase Robertson

Chase Robertson

Bronze member
Your headset is probably loose. Take your bars off, tighten your headset, then put your bars back as far down as they will go and tighten your clamp good.
 
Chase Robertson

Chase Robertson

Bronze member
Well what is wiggling on what?
The bars wouldnt be wiggling on the fork, because i know from personal experience that buffs fit fine on stock forks.

It would have to be either the headset or the foldy. Is your foldy bolted?
 
J

JGOOD

Member
i have buffs also the only time my bars wiggle on stock forks is when my headset is lose or my foldy isnt bolted good enough. tighten everything up and if u have another clamp throw it onto your bars.
 
Joe Riley

Joe Riley

The Gypsy
Staff member
wait, are the buffs new or old? josh kish had a problem where his stock fork threaded the bars and made too much space and they wiggled.
 
S

stephen alan

Member
same thing happened to my sz 3peice bar, i just took of my bar and put tape under so there is now room for wiggle. problem solved. make it un noticeable tho.
 
You must log in or register to reply here.
Top