eagle wheels

J

JoshToy

Member
Should have pressed them in correctly. You probably hammered them in all sideways. I've been riding mine for over a month now and they're still like new. Always lube the bearing and hub and put in straight.
 
Lil Steve

Lil Steve

Member
JoshToy said:
Should have pressed them in correctly. You probably hammered them in all sideways. I've been riding mine for over a month now and they're still like new. Always lube the bearing and hub and put in straight.
Click to expand...
Thanks for the advice. I'll try that out.
 
M

marcel

Member
Pitty most are not telling that they hammer the bearings in wrong or that they used wrong size spacers..
Anyhow, just get the right size spacer in , tighten well and nothing happens......
Otherwise use some Locktide and glue the outside of the bearing........`PROBLEM` solved...simple
 
S

scootbaseball

Member
Lol, what a retard. He put the bearings in than taped them to the wheel. Omg I can't stop laughing!!!!!!! That's what you get for trading at TIC, CJ CJ CJ. I had respect for you for a while but I just totally lost it. LOLOLOLOLOL!!!!!
Beachsk8er77 (6:21:02 PM): tape you fuckkaass.
Treihart39 (6:21:10 PM): i did
Beachsk8er77 (6:21:15 PM): did it work?
Treihart39 (6:21:21 PM): not really
Beachsk8er77 (6:21:41 PM): you need to tape the inside then put the bearings in
Treihart39 (6:22:38 PM): inside like around it?
Beachsk8er77 (6:22:43 PM): mhm'
Treihart39 (6:23:05 PM): ll try that
Beachsk8er77 (6:23:24 PM): thats what your suposed to do you idiot not tape over the bearings -_-
Treihart39 (6:23:39 PM): lol i dint no
 
humpurple kushiones

humpurple kushiones

Steel Member
Kyle Tolentino said:
Lol, what a retard. He put the bearings in than taped them to the wheel. Omg I can't stop laughing!!!!!!! That's what you get for trading at TIC, CJ CJ CJ. I had respect for you for a while but I just totally lost it. LOLOLOLOLOL!!!!!
Beachsk8er77 (6:21:02 PM): tape you fuckkaass.
Treihart39 (6:21:10 PM): i did
Beachsk8er77 (6:21:15 PM): did it work?
Treihart39 (6:21:21 PM): not really
Beachsk8er77 (6:21:41 PM): you need to tape the inside then put the bearings in
Treihart39 (6:22:38 PM): inside like around it?
Beachsk8er77 (6:22:43 PM): mhm'
Treihart39 (6:23:05 PM): ll try that
Beachsk8er77 (6:23:24 PM): thats what your suposed to do you idiot not tape over the bearings -_-
Treihart39 (6:23:39 PM): lol i dint no
Click to expand...
ROFLMFAO!


no offense cj
 
ISCOOTPA

ISCOOTPA

Bronze member
rofl....my eagles were like that when i took them out of the box i was uber mad....so i just used tape, now i can like lift the urethane off the hub, and iv had the wheels for like a week.....I RRR MMAADDDD
 
You must log in or register to reply here.
Top