Envy Brakes

[Nate_Robertson]

hey i snapped my envy brake what are some good envvy compatible brakes that have spacers thnx

 

[RiccardoM]

Magray.

 

[702_dialed_rider]

just get a phoenix switch blade

 

[Broccoli1]

just get a phoenix switch blade

He will need longer Axle spacers with a Phoenix brake because Envy Brakes have spacers welded on.

Magray made a replacement brake with spacers for the Blunt/Envy but I can't seem to find them available in the states.

 

[702_dialed_rider]

yeah i know spacers are easy to get tho

 

[Nate_Robertson]

yeah i know spacers are easy to get tho

tell me where u can buy them

 

[Nate_Robertson]

Magray.

where can u buy them in the states

 

[JCott]

everyone i know that has had an envy brake snapped it

 

[issac p]

if you can find a magray brake, get one.
i think they are making a comeback because they just came out with new pegs

 

[RiccardoM]

I'm not sure I live in the yUK.

 

[callummm]

buy a switch blade. i drilled 2 holes and countersunk them. i took my snapped envy part and sawed off the bit at the back, with the spacer still attached and used that, worked perfect

 

[instinctscooter]

swtchblades are overrated, they snap ulike tsi brakes

 

[blackscootdawg]

get the middle part of two bearings that are sh-t, get them out, and use them, and get a Pheonix Swithblade or TSI(i'd get this one) brake, and just drill and counter sink the two holes in the deck.
Screw it in, and ur good to go.
hope that helped

 

[ztkAZ]

you have to cut the broken brake for the spacers

 

[Alex Collins.]

For spacers this is what i did i hammered the crap outta 2 bearings and used the little spacers in the center of the bearing and they work perfect!

 

[gjdadj]

Try out a crisp brake

 

[GrantWood]

you have to cut the broken brake for the spacers

I used the old spacers off the old brake and added a small spacer on each side. Then installed a phoenix switchblade brake.

 

[Ethan_]

yep

 

[thealexbuffery]

Try out a crisp brake

the bolts are the worst. ever.

just buy another envy brake its less hassle