Fitting 125mm Yak's On A Pro Model?

[JackDillon]

Well yeah^ is it possible with out any major modification? i dont mind if i have to bring out the angle grinder or anything iether. Sorry if there is already a thread about this i couldent find anything with the search feature or in the super modding thread.

Thanks Guys!

 

[skinner]

get the angle grinder and grind the wheel down........... ITS IMPOSSIBLE!!!!!

 

[scooterperu]

.... if u grind it... it wont be 125, lol XD

you can drill new holes for your brake and it0ll be fine =]

 

[zakmak]

I found an offbrand brake and just sanded down where the brake touches the deck on the top part where your foot goes, it raised it a little and i sanded down the spring a tiny bit. It's very possible without drilling new holes.

I have no clue if it will work with a pro model brake. Someone try it!

 

[the_SD_local]

- 125mm SR fork
- grind out the deck at the rear drop outs
- drill and remount brake farther forward

 

[zakmak]

or what Andrew said.

 

[Big L]

get the angle grinder and grind the wheel down........... ITS IMPOSSIBLE!!!!!

hahahaha i am running dual 125s, its not

 

[Kevin11]

u have to cut out ab it more wheer u break goes and drill a new hole, and file the hell out of ur fork, slap them bad boys on and ur ready to roll