Dylan Kasson
Steel Member
alright so i need to get rid of all my stuff because proto/sr parts never break on me so i dont need all this extra stuff laying around
just so you know i will clean everything, lube them up and make them ready to go when i ship them out also if it is a axle or any type of screw im not going to sell it if it is stripped or is close to stripping because that is just not fair
if you want to order something try to make it a decent sized order (im not going to ship 2 back axles to somebody, haha)
i will not pay for shipping i will let you know how much it is before you pay and also i only take paypal
also since im going to san diego soon i might not be able to get back to you until after (like january 7thish)
reinforced pro model fork use to be gold but i rawed off the paint $15
headtubes some without cups some with and some drilled out a bit for a steep angle headtube just let me know which one you want $5
t-tubes, steering tubes, really bad foamies, and the little handlebar things with the pin haha steertubes $5 t-tubes $5 handlebar things $2
crossbars 1/2 inch these will not fit bar ends they are thick steel and these were my favorite when i rode buff bars but you have to put spacers in the bottom of the clamp when you put them on
it is like 15-18 wide and i can cut them skinnier just let me know $5
fuzion wheels used like once when i got my fusion and then some fat kid stepped on it and broke the deck havent ridden it since they still have the lines on them! $5 each
fsa dh pro sealed bottom cup only it doesnt have the casing around the bearing but it spins fine if you dont believe me i will send you a video of me spinning it with my finger haha comes with the bottom race too $10
fsa pig unsealed comes with absolutely every part i will clean and lube everything before i ship the cups have a little gold spraypaint on them which could be easily rawed off $10
single/double clamps $1 single $2 double i will checked for stripedness and if it i wont ship it
back/front axles and bearings non moving bearings being used for spacers $.50 each working bearings $1 each (i wont send you a so so bearing) axles $1 each including screw ill check for strippedness
headset bearings and nuts and races $1 each nut/ bearing/ race i will clean the bearings out and lube them before shipping
off brand deck that pretty much is a old A i rode it for like a day and it rides exactly like a old A and it will fit your regular bolts
its got some really fresh grip and no cracks $15
ninja deck, basically like those really long micros no cracks $10
knowped no cracks or anything with wheels in great condition i dont have the headset bearings or anything relly for the headset and THE FORK IS SNAPPED but the wheel on it is for sale the grip is dirty but it still works fine
im thinking $40 for the whole knowped stuff? i really have no clue about this stuff help me out on prices here and dont rip me off haha
really really wierd scooter the wheels have flatspots and the foam grips are torn but if you want it for some reason ill sell for $10
triple reinforced pipe to reinforce fork 2 layers of copper one center layer of steel, your fork will not break when you have this haha the only thing is you have to make its secure in your fork like with shoe goo because it will fall down and hit your front wheel $2
just so you know i will clean everything, lube them up and make them ready to go when i ship them out also if it is a axle or any type of screw im not going to sell it if it is stripped or is close to stripping because that is just not fair
if you want to order something try to make it a decent sized order (im not going to ship 2 back axles to somebody, haha)
i will not pay for shipping i will let you know how much it is before you pay and also i only take paypal
also since im going to san diego soon i might not be able to get back to you until after (like january 7thish)
reinforced pro model fork use to be gold but i rawed off the paint $15
headtubes some without cups some with and some drilled out a bit for a steep angle headtube just let me know which one you want $5
t-tubes, steering tubes, really bad foamies, and the little handlebar things with the pin haha steertubes $5 t-tubes $5 handlebar things $2
crossbars 1/2 inch these will not fit bar ends they are thick steel and these were my favorite when i rode buff bars but you have to put spacers in the bottom of the clamp when you put them on
it is like 15-18 wide and i can cut them skinnier just let me know $5
fuzion wheels used like once when i got my fusion and then some fat kid stepped on it and broke the deck havent ridden it since they still have the lines on them! $5 each
fsa dh pro sealed bottom cup only it doesnt have the casing around the bearing but it spins fine if you dont believe me i will send you a video of me spinning it with my finger haha comes with the bottom race too $10
fsa pig unsealed comes with absolutely every part i will clean and lube everything before i ship the cups have a little gold spraypaint on them which could be easily rawed off $10
single/double clamps $1 single $2 double i will checked for stripedness and if it i wont ship it
back/front axles and bearings non moving bearings being used for spacers $.50 each working bearings $1 each (i wont send you a so so bearing) axles $1 each including screw ill check for strippedness
headset bearings and nuts and races $1 each nut/ bearing/ race i will clean the bearings out and lube them before shipping
off brand deck that pretty much is a old A i rode it for like a day and it rides exactly like a old A and it will fit your regular bolts
its got some really fresh grip and no cracks $15
ninja deck, basically like those really long micros no cracks $10
knowped no cracks or anything with wheels in great condition i dont have the headset bearings or anything relly for the headset and THE FORK IS SNAPPED but the wheel on it is for sale the grip is dirty but it still works fine
im thinking $40 for the whole knowped stuff? i really have no clue about this stuff help me out on prices here and dont rip me off haha
really really wierd scooter the wheels have flatspots and the foam grips are torn but if you want it for some reason ill sell for $10
triple reinforced pipe to reinforce fork 2 layers of copper one center layer of steel, your fork will not break when you have this haha the only thing is you have to make its secure in your fork like with shoe goo because it will fall down and hit your front wheel $2
