How To Bolt Your T-tube without really bolting your t-tube Picture Tutorial.

[Jordan Jasa]

i've been thinking about doing this for kids who have stock bars and don't like the big clamp, but don't have access to a drill, and yohanan's thread finally inspired me to do it.

For this modification you will need

1 5mm allen key
Some kind of bolt/screw, and nut
spacers
screwdriver or wrench to tighten the nut onto the bolt/screw.

Step 1. Take the allen key, and untighten the clamp as shown:

It should look like this after you take everything off-

Step 2. Put in your bolt/screw (I used a screw), and make sure you have some spacers (the little metal ones that come on the clamp work nicely), and put the nut on the other end and tighten.

End result looks like this-

So yea, its a very simple mod, and it helps tons if you can't afford one piece bars, and its pretty good at preventing your knee from getting destroyed by the clamp arm.

 

[Mike Montgomery]

great job, jordan!

 

[fly]

nice but i like regular bolting better because i set the bolt way lower than my knee. But if you dont have a drill this works great.

 

[maxlikesscooters]

goodjob. i did this to one of my scooters already.

 

[idk47]

Yeah but you just take out the lever and put the cylinder back in and tighten then it's good.

 

[GoGzS]

Been there, done that, hitted my knee on it Doesn't really help...tho nice tutorial...props

 

[demo]

great job... nice tutorial

 

[mynameisjaymez]

Nice tut man !.
Thats actually such a good idea you could do on the spot.

 

[dre]

Been there, done that, hitted my knee on it Doesn't really help...tho nice tutorial...props

 

[Hayydennn]

yea alot of people have already done this

 

[qwxor]

Doesnt help but nice tutorial<3

if youre gonna have the bolt just drill 5 inches down where the clamp was and you'll never even come close to it

 

[scootcb]

l0l i did that today cuz i was bored..

 

[Chris Picone]

I found it was easier just to hammer the tip of the quick release in and then file its edges. This is cool though.

 

[Jordan Jasa]

lol guys, it works for me

maybe ya'lls just need to clean up your riding so you're not all over the place, nailing the bars? jk

 

[skooterkid]

whoa, i never thought of this. Haha, its so simple but....i guess i was too lazy to do this. Good idea Jordan

 

[humpurple kushiones]

just did it yesterday

 

[TristanVesely]

haha i did this with my old clamp, but then i got to drill it, so w/e.

 

[scooterperu]

you forgot to cut that bolt, it is dangerous. i used to do that to my stock bars =] cool mod

 

[BradAyres]

Or you could just bolt it so its better

 

[D= its sam!!]

]
you forgot to cut that bolt, it is dangerous. i used to do that to my stock bars =] cool mod

yeah haha

Or you could just bolt it so its better

this is for people that dont have a way to drill through there bars. so yeah lol, defiantly better than the stock clamp.

props on the tut