How to remove bearings?

[Ethan_]

my bearing spacer does not move very much to the point that if i stick a razor axle it just goes straight through. How do i move the spacer and bearing?

 

[BenJelinek]

take a small (2-4mm) allen key and jimmy it around until you get the bearing spacer to move a bit. then, take your axle and gently set it into the top bearing and hit it as hard as you can with a hammer once, repeat until it falls out. put the wheel on something like a vice that supports the underside of the wheel but has a big enough opening for the bearing to fall through.

 

[Austin Forkner]

If your not planning on reusing them or anything just stick a flathead screwdriver in and beat them out.

 

[tyler_magro]

not gonna lie I'm a pro with installing bearing and i only use an old razor axle and a hammer. I could do a tutorial if you don't figure it out yourself

 

[Robert]

not gonna lie I'm a pro with installing bearing and i only use an old razor axle and a hammer. I could do a tutorial if you don't figure it out yourself

lol

I just use a Philips head screwdriver and a hammer to get them out

 

[Scooterscans]

i have an eagle bearing remover and installer. very easy with no hammering