I made new compresion

7

702_dialed_rider

Silver Member
I made a new type of compresion



Have you ever wanted to use oversized bars but already had ics or don't want to use HIc or scs ? Well look no farther today I bring you the oics
Oversized.inverted .compresion system it consist of 2 items (technically 3 ) a shim whith a starnut inside and a ics bolt whith out aleen key
This compresion is really dialed and no need to take you're bars off to tighten headset so sit back and watch this small vid of it.
http://www.youtube.com/watch?v=oDScCrVPzyc
 
7

702_dialed_rider

Silver Member
I like this better and I don't want a starnut in my forks because what if I want to use standard bars one day then ovesisezed the next and I like to adjust my headset whith ease and this is more dialed and will not come losse as fast
 
MattThomMakesMeWarmInside

MattThomMakesMeWarmInside

Silver Member
How is using oversized inverted compression more dialed? ICS was the original compression used when SR forks first came out and it has since been moved away from for the reason that there were better ways to compress forks and bars. Not trying to be a dick or anything, it just doesn't seem necessary to me when HIC exists.
 
CallumR

CallumR

Steel Member
Dude, I thought you actually started to spell, come on, nobody is going to take someone seriously who spells at a second grade level.
 
7

702_dialed_rider

Silver Member
My iPhone fucks me up . When I type and I just like this
Because I am able to switch from oversized to standard fast and I can sell my fork whith out a starnut in them because some kids don't want one.
 
7

702_dialed_rider

Silver Member
grant said:
How is using oversized inverted compression more dialed? ICS was the original compression used when SR forks first came out, and it has since been moved away from for the reason that there were better ways to compress forks and bars. Not trying to be a dick or anything, it just doesn't seem necessary to me when HIC exists.
Click to expand...

It is for some reason and I
Made it out of stuff from around my house because I wanted to ride my batwings instead of my district al2 bars and I don't have a HIc kit handy I just cut this from my old bars that had a star but in it
 
Z

zanarolen

Guest
Your compression mechanism looking good but need some rectification.
 
B

Broccoli1

Bronze member
Sort of been done already using HIC shim, ICS Bolt and either a nut on the top cap or just a starnut as a nut.

http://www.youtube.com/watch?v=P3n0U-VRls0

Seems about the same for adjusting headset: Ics bolt/HIC system requires you to remove the wheel.

Regular HIC requires you to remove the bars.


The only problem with using a standard Hex Bolt for ICS is that you have to carry that Socket that matches the Bolt head- just means carrying another tool- and iffin' you misplace it then yer screwed until you get another one.

Standard ICS bolt is 5mm and usually someone at the park has one of those.

(Fuzion Ics is a regular hex bolt)
 
7

702_dialed_rider

Silver Member
Broccoli1 said:
Sort of been done already using HIC shim, ICS Bolt and either a nut on the top cap or just a starnut as a nut.

http://www.youtube.com/watch?v=P3n0U-VRls0

Seems about the same for adjusting headset: Ics bolt/HIC system requires you to remove the wheel.

Regular HIC requires you to remove the bars.


The only problem with using a standard Hex Bolt for ICS is that you have to carry that Socket that matches the Bolt head- just means carrying another tool- and iffin' you misplace it then yer screwed until you get another one.

Standard ICS bolt is 5mm and usually someone at the park has one of those.

(Fuzion Ics is a regular hex bolt)
Click to expand...

yeah i know that is why i bought a other ics bolt from my local shop that i used to go to and then i noticed that it was shorter than my old bolt
 
You must log in or register to reply here.
Top