Inward fork Threaded help!

[Mason. A]

My inward 0 offsets are threaded but they wobble like a bitch!
i have stock headset and i no the headset is fine
but after i tighten the top bearing cup then the nut its all good for like 3 hours then it losens up?
what should i do?

BTW when i took my stock forks out to but my inwards in all i had to do was but the bottom bearing in? nothing else came out or moved, so whats a pinch ring? and is a pinch ring only for threadless headsets?

 

[coreysmells]

Mine is fine , just tighten it really tight then it might losen up and be ok

 

[Mason. A]

Mine is fine , just tighten it really tight then it might losen up and be ok

If you do it too tight then the headset wont spin?

 

[Mattt.C]

1. Get a new headset.
2. Use some Threadlock.

 

[gerkin of honour]

put a second nut on top of the top nut and it won't come loose or wooble!

 

[Mason. A]

put a second nut on top of the top nut and it won't come loose or wooble!

oh yeh, ill try that :S want it make my work tube smaller or some shit which will be bad?

 

[sk8er-boi-207]

use lock tight.