ive got a PROBLOM!!!!

[Hunter Treviranus]

ok so i was putting on proto wheels on and when i went to put the back wheel on it touches my 110 tsi flexfender and doesnt let the wheel move any tips?

 

[Chris Weik]

bend the flex fender

 

[BrendanO'Brien.]

Bend the flex fender up til it fits. Lock.

 

[Hunter Treviranus]

i have been and it is just bend back as soon as i let go

 

[alec logan]

hold the flex in the posistion you want it to be in for awhile, so it perm bends.

 

[michaelchavez]

is it rubbing on the top part of the flexy or the front part(on the underside)

 

[Hunter Treviranus]

heres a pic

 

[Hunter Treviranus]

need to fix this^

 

[michaelpytel]

place a screw driver in between where the fender hits they wheel or realy andy sort of shim type devise, then constantly hammer the end of the flex fender to reforem it into a new bend. hope it works, good luck.

 

[Hunter Treviranus]

im putting a old grip in between the wheel and the brake and trying to bend the fender down if theat doesnt work ill try doing the shim thing

 

[Realscooters8978]

just push on it and bend the shit outta it.it will move, i had the same problem

 

[R-Dubya]

It's not a TSI deck. You drilled the holes in the wrong spot. Drill new holes. Derr.

 

[mason buckley]

its inthe right place just put a screw driver inbetween the wheel and break pull and hard and problem fixxed

 

[R-Dubya]

Dude. It is not in the correct place lol. Look at the deck, it has a standard brake hole, obviously it isn't a TSI deck. If he just drilled the hole up maybe 2mm further it would work just fine.

 

[Carson .]

Dude. It is not in the correct place lol. Look at the deck, it has a standard brake hole, obviously it isn't a TSI deck. If he just drilled the hole up maybe 2mm further it would work just fine.

this is right..good eye r-dubya

 

[mason buckley]

hmm i guess he could move it a bit farther up but all you really need to do is bend it up

 

[R-Dubya]

TSI Steel flexxies are hard as fuck to bend by hand.

 

[mason buckley]

i know you can either take the wheel off and use your foot or a screw driver when the wheel is on

 

[Hunter Treviranus]

nothings working

 

[R-Dubya]

You should have checked before you drilled the holes lol