Little metal case that goes in your wheel!!!

[D3]

Well the little metal case type thing that goes inbetween the bearing in ya wheel.

does any1 else not use it because i feel that its to much of a hassel to get the bolt through if you have to put washes and ect on it. 8)

 

[whoopa]

it helps your bearing role smoother i would recomend using them

 

[gazza707]

yea i always you them...

if you have truoble putting your axel through put an allen key through and than put your axel in, thats what i do ..if that makes sense

 

[lukejaritz]

yes i use them, nicely sed gary

 

[silksimon]

the seperator also lets u tighten your wheel all the way and still spins perfect so i would use them.

 

[D3]

i got a wheel though it has them allready installed like melted in

 

[farmboy uk]

yea always use it as otherwise if you don't when you tighten the axle your dropouts/fork can rub on the wheel and do the allen key thing that gary said thats what i do

 

[Eric Magray]

USE IT!!

almost a year ago i thought i didnt need it so i took it out (it was the front wheel) and when i tightend my wheel the core cracked and my wheel went super slow it would barely move and i stupidly went to drop in my friends quater and i flew over the bars cuz my wheel stopped.

 

[dan barrett]

yea lol, i love nose mannys, and it wasnt it nad my sooter was so slow, then went to try 2 foot nose mannys wit both feet on deck, then did a nose manny and fell, learn by mistakes.

 

[VillageFox]

i never use them. i only have one and its in my old a.( which my brother uses)

 

[Mr. Allen Getts]

if you dont use them when u tighten ur wheel ur bearings will squeeze together causeing them no not roll as fast as they should..just stick a smaller size allen key in

 

[Steezeman]

Yeah I used to not use them because I was lazy but I learned my lesson. Actually I just put them back on and realized it was a lot better.

 

[scooter4life]

i dont use it and i still ride plenty smooth

 

[farmboy uk]

just use it lol

 

[Brian Boston]

i dont use it and i still ride plenty smooth

With it out, tighten your wheel until you cant tighten anymore, your wheel probably wont spin good. Put it in, tighten it as much as you can, your wheel probably will spin ALOT better

 

[jakob-b]

there mad annoying tho but i guess they work

 

[D3]

Oh sick because when i didnt have em in the well would just stop spinning thanks guys
cheers

 

[Miles Quirk]

use it.
your a dumbass if you have problems getting them in.
get a philips head screw driver small enough to fit threw, push it threw one side, it should hold the spacer in the right spot, and then push the axle threw the otherside, using the axle to push the screw driver out.

 

[jakob-b]

now i get it

 

[Brian Boston]

use it.
your a dumbass if you have problems getting them in.
get a philips head screw driver small enough to fit threw, push it threw one side, it should hold the spacer in the right spot, and then push the axle threw the otherside, using the axle to push the screw driver out.

You can just use the allen key you use for the bolt too