My bars too big

[Ethan_]

i have french id steel trees. they are 20 x 20 and have back sweep by 5 degrees. are they too big for me cus i used to ride 20 wide 19 high, im also about 5 ft high.

 

[christianewing]

 

[Josh Henderson]

too high? i had 22's when i was five foot

 

[iliveinahouse1]

cut them down, but you said you used to ride 20 so what is the problem

 

[Josh.c]

5 foot 7 and i ride 25 high

 

[702_dialed_rider]

5 foot 7 and i ride 25 high

:like:me to but i am 5foot 11 lol

 

[CoryR]

im 5 foot 4 and i ride 22, 23 1/2 in my phoenix scs

 

[madzach22]

Im pretty sure the steel trees have the integrated clamp. Maybe hes asking what to do since the clamp is there

 

[notaek]

you should of thought about that when you bought them considering you cant cut them height wise

 

[William Juniper]

I ride 22 or 23 im 5'5

 

[Josh Young]

im like 6 or 6'1 and i ride 25.5 high 20 wide

 

[robtom123]

5ft 7 and i ride either 20 or 21 im not sure

 

[Robert]

This isn't a thread about your height to your bar comparison.

Its to help him with a problem he has.

 

[instinctscooter]

This isn't a thread about your height to your bar comparison.

Its to help him with a problem he has.

in a way true but he is asking if it is to high and people are giving examples,i am almost 6ft and ride 21 high (18 plus 3 from scs and spacers) and i tihnk its a fairly good height, too cut them down just use a hacksaw, it dosen't matter if its not entierly straight then either cut slits and use a std clamp plus threaded, ics or hic compression (i am fairly sure these bars arent oversized meaning you cant use hic ) or dont cut a slit if you are going to use scs

 

[Ethan_]

How come my inward ts are 20 wide but the steel trees are and inch longer and their 20 x 20?

 

[Josh Henderson]

because you measured wrong^

 

[Juan.]

I ride 26 high 22 wide. Im 6'1