My scooter is stuffed (i think)

Status
Not open for further replies.
M

MATT12390

Member
heyyy i got a onepeice and ive got my clamps tightened sooo much they wont go any further but the onepeice keeps coming up the forks thread shit about 15 mm plz help
 
ashz893scootys

ashz893scootys

Member
push ur bars all the way down make sure theres no grease on the forktube or inside the bars and keep ur clamps as tight as the can handle
 
M

MATT12390

Member
ashz_893 said:
push ur bars all the way down make sure theres no grease on the forktube or inside the bars and keep ur clamps as tight as the can handle
Click to expand...
thnx i tried it it worked for like 5 mins but its doin it agsin wtf????
 
M

Mattt.C

I own WSP.
The problem is on the inside of the bars so i shim wont do its job well, try using two double clamps.
Or just get different bars. If the downtube has a thickness of less than 1.5mm its most likely not going to clamp down properly.
 
M

MATT12390

Member
Mattt.C said:
Are you forks threaded,
And what bars are they.
Click to expand...
there from ebay aus hers the ]http://cgi.ebay.com.au/SCOOTER-HANDLE-BARS-one-piece-powder-coated-DARK-GREEN_W0QQitemZ270445010816QQcmdZViewItemQQptZAU_Sport_Scooters_Accessories?hash=item3ef7c75f80&_trksid=p3286.c0.m14[/url]
yer my forks r threaded but the bars r not
btw wats a shim?
 
J

joshuadawes

Member
try tighten each clamp bolt evenly. A shim is a piece of metal u put around ur bars under the clamp like a v can or something. What type of forks do you have?
 
Joe Riley

Joe Riley

The Gypsy
Staff member
use a shim. if the one pieces are thin then youll need one or else theyll slide around any way.
 
Status
Not open for further replies.
Top