removing the brake of OLD A

[zild23]

ive already searched and make this tread before but i follow the steps and it is still not workin..any tips?

 

[dezbert]

Screw Driver + Beating the holy fuck out of it.

 

[Mark Abramsky]

sometimes it wont come out at all back a while ago i wanted to use an old a brake and it wouldnt come out so i sawed the dropout off and got the brake haha

 

[Taylor Feist]

little screwdriver and a little wd 40 and a hammer

 

[gerkin of honour]

cut the bolt on both (inside)sides with a hacksaw and drill out the little bits still in the drop outs. worked for me.

 

[Humma]

just pop the pin out and hammerrrrrrrrrrrrrr

or drill/cut it out

 

[JonnyJonDogg]

use the correct tool!! its like pliers with 2 little things that stick out

 

[Scott Trainer]

i just put my old a deck on its side in a vice, then beat the shit outta the hole with a punch and bigass hammer

 

[konowaluk]

step-1-get pliers
step-2-take the nut off the brake bolt
step-3-get a hammer
step-4 take the hammer and hit the bolt out
step-5 your dun

 

[p.c]

is it realy that hard
3 hits with a punch and a hammer and it done