Scooter stand

[Keatonspence]

Could y'all help me out with some ideas for a scooter stand?

I'm making it for the scooter store I work for to help be more organized. It needs to hold 10+ scooters and preferable be on the floor.

Also. We need a good display for the forks, wheels, compression, decks and bars.

Hit me up with your ideas!! Maybe I'll throw in a free fork or wheel if I pick your idea out to use. I'll ask the owner and I'll see what I can do.

 

[SeanMartine]

Use two by fours and make it so the bottom of the deck(near the wheel) sits on a 2x4 then have another 2x4 sit ontop of the deck (near the headtube) and so then the deck will want to slide forward but the brake will hit the 2x4 and stop

 

[SeanMartine]

Kinda like the one at the end of this video.. http://m.youtube.com/watch?v=snCtm-BBJQI

 

[JCott]

make a rectangle of 2x4's 1.5 ft wide by however long you want. then cut a 2x4 to get 2 12 inch long pieces. screw those two pieces standing up vertically in at each (1.5ft long)end of the rectangular frame you have made 1ft from one side and 6 inches from the other. then screw a long 2x4 onto the two vertical pieces connecting them. you should be able to slide a scooter onto of the rectangular frame having the deck under the top 2x4, the deck should rest on the frame and the top 2x4 should keep the back end from lifting up too high and falling

 

[Kyle B.]

For bars get the pieces Of round thing metal and hang them at an upward slant and boom bar holder

 

[Kyle B.]

Or u could do a downward slope with little rubber pieces u could glue on like in Sean video

 

[Keatonspence]

Thanks for the positive feedback so far!

 

[Kyle B.]

You could have my idea for a cheap 4.65 black revrnton?

 

[Kyle B.]

Jk but damn I wish I had one lol

 

[Keatonspence]

Haha. If I would one to just give away haha. They're nice, just too short.

 

[Kyle B.]

I know I want one so bad I want to steal my friends lol

 

[SeanMartine]

Wheres my fork hahaha

 

[Keatonspence]

Lol c'mon sean. I was expecting something a little more original. I made one kind of like that though. This will do for now.

 

[Kyle B.]

I was messing around drawing trying to find something forbidden and came up with this

 

[Kyle B.]

But u could make it longer

 

[Keatonspence]

That's not bad^^

It would just be difficult to make it fit all the different style headtubes

 

[Kyle B.]

Not really because it dosent matter if front wheel dosent touch the ground it dosent matter or u guys could make a rack for district addict phoienex etc etc

 

[Kyle B.]

or thier is this one off the internet but hey it works
http://www.vert-gear.co.uk/s-rak-3-slot-scooter-and-skateboard-stand-patent-applied-for-883-p.asp

 

[Kyle B.]

And u guys could make it And not buy it