spacer or bearings

[Ethan_]

i tighten my axle all the way and the wheel moves back and fourth which produces a realy nasty low pitched rattle because 1 the wheel might be ovalized 2 the bearings spacers are squashed and the bearings go in a little bit or 3 the spacers in the deck sorta flange outt and taper the oppo way. I have sliders bones and an rup deck.

 

[dpnelson31]

How old are the bearings? If they are really worn, there could be play that can't be fixed unless you replace your bearings.
If not, you may need a slightly longer spacer outside the wheel or a bolt that will tighten harder.

 

[Josh Henderson]

put some washers in there and see if that works.

 

[Ethan_]

Nelson: i got the bearings in august they are fine and ill try to put a spacer.
Josh: In the bearing spacer or outside because ill put it outside

 

[iliveinahouse1]

oh no the scooter is not dialled, just ride it, my wheel is a tiny bit loose

 

[Robert Reichley]

if by back and forth you mean side to side, then its the spacer.. its too long

 

[Ethan_]

i dont think it matters anymore because it makes that sound from time to time