Streach razor clamps

[arifur794]

ok so i searched this but couldnt find anything.. i was wondering how to streach razor pro dub clamps. can anyone tell me how ..i wanna get some buffs

 

[Mike Montgomery]

Put the screws through the clamp backwards. Stick a penny between the end of the screws and the other side of the clamp. Tighten the screws into the penny. This willl push the side of the clamp. Then put it on your bars. Then take out the screws and the penny. Put the screws in the right way and tighten it.

 

[DMazz]

jus put two screw drivers through the clamp like an x and jus press down and itll stretch it

 

[JDBen]

Put the screws through the clamp backwards. Stick a penny between the end of the screws and the other side of the clamp. Tighten the screws into the penny. This willl push the side of the clamp. Then put it on your bars. Then take out the screws and the penny. Put the screws in the right way and tighten it.

omg thats quite clever

 

[priority]

Put the screws through the clamp backwards. Stick a penny between the end of the screws and the other side of the clamp. Tighten the screws into the penny. This willl push the side of the clamp. Then put it on your bars. Then take out the screws and the penny. Put the screws in the right way and tighten it.

thats a sick idea i never heard of that (im noob)

 

[Devin Hohlbein]

us washingtonians know everything haha

 

[Joe Riley]

Put the screws through the clamp backwards. Stick a penny between the end of the screws and the other side of the clamp. Tighten the screws into the penny. This willl push the side of the clamp. Then put it on your bars. Then take out the screws and the penny. Put the screws in the right way and tighten it.

thats smarticles

 

[Rosco]

you couldnt of searched too hard. And that penny idea is the best. i do it every time i have to stretch my clamps.

 

[ErikHoward]

well im probaly the only one who does this


all i do is get a wrench stetch it put the bars threw thats what i did

 

[arifur794]

yeah i like the penny idea
thanks a lot

 

[scootcb]

Put the screws through the clamp backwards. Stick a penny between the end of the screws and the other side of the clamp. Tighten the screws into the penny. This willl push the side of the clamp. Then put it on your bars. Then take out the screws and the penny. Put the screws in the right way and tighten it.

omg thats quite clever

wow. u never heard that b4?? yeeeeup.