Trampoline Scooter Ideas!!
- Thread starter tarrymonz
- Start date
DevonIs1337
Member
the first 3 are actually good ideas.
proudlefty
Steel Member
I like the tennis ball idea. I spent forever trying to think of something to cover the fork with so that it wouldn't damage the tramp
I just finished the third one ive ever made.
And im basicly making a tut here.
1. Get an old scoot or find one (hard rubbish).
2. Do it up as much as you can, bolting, wider bars and get some old or spare parts to add on to make it even better.
3. Find an old mattres on hard rubbish or anywhere. And harvest some foam from it.
4. Get about 2 rolls of electrical tape or any other tape should do (not silly craft tape or string)
5. Cut a long strap of foam (any type of kitchen knife or scissors will do) and place it on the bottom of the deck and tape the whole thing up.
6. Cut some chunks for the forks (nead a fair bit) and tape that up.
7. Make sure ALL sharp edges are adqeutly covered with foam and tape.
8. Take off the brake.
And im basicly making a tut here.
1. Get an old scoot or find one (hard rubbish).
2. Do it up as much as you can, bolting, wider bars and get some old or spare parts to add on to make it even better.
3. Find an old mattres on hard rubbish or anywhere. And harvest some foam from it.
4. Get about 2 rolls of electrical tape or any other tape should do (not silly craft tape or string)
5. Cut a long strap of foam (any type of kitchen knife or scissors will do) and place it on the bottom of the deck and tape the whole thing up.
6. Cut some chunks for the forks (nead a fair bit) and tape that up.
7. Make sure ALL sharp edges are adqeutly covered with foam and tape.
8. Take off the brake.
charliemein
Steel Member
i just go on my trampoline with my normal scoot nothing has happened to the trampoline
scooterkillkidphil
Steel Member
I basically used an old sweater and duct tape for the back and for the front i took madd duct tape and cloth
James Shaheen
Bronze member
haha i got like this super getto old plastic snow scooter that i use its just a plastic deck with some bars attached you cant realy whip it rite cause the bars on it dont move and you have to throw the whole thing around when you do whips and if you try a bri you hit yourself in the face its so great haha
Michael Rankin
Super Moderator
tennis ball on the fork and 2 more tennis balls on each dropout
RyanNew
Member
I use a beer holder for the fork and tape that on with duct tape
then for the deck i get an old cloth/towel and tape that on real tight
then for madd gear/blade another beer holder on the back dropouts and tape it on or for my razor pro i take the brake and wheels off (duh) and use the towel in the middle but spread it out all the way to the back and tape really tight and its also good to tape about 2 cm thick on where the forks end and put pressure on and the back dropouts so it doesn't wreck the trampoline... thats what i do its good.
then for the deck i get an old cloth/towel and tape that on real tight
then for madd gear/blade another beer holder on the back dropouts and tape it on or for my razor pro i take the brake and wheels off (duh) and use the towel in the middle but spread it out all the way to the back and tape really tight and its also good to tape about 2 cm thick on where the forks end and put pressure on and the back dropouts so it doesn't wreck the trampoline... thats what i do its good.
fritz loves his ritz
Member
just get an old a mod any tape it up really good and u can proablly get one for cheap!!!!!!
peachster2
Member
broken fork on the front(theres a still the thread bit but no actual fork), no back forks(using a madd/blade deck), tennis ball over fork, rubber bands and foam, but what would be ideal would be one of those plastic 3 wheeled kid ones, snap the forks and take of the wheels and it would be so light.