Triple bolting issue.

[Albyhouse]

Ah. As a newish scooterer, i decided to triple bolt my razor pro for better stability.
I used two 5/16" 3 inch bolts, and a 3/8" 3 inch one.
After I was all done bolting it up, the whole mechanism still seem to wobble a little. Is this normal?

 

[Jeremy Dalgliesh]

no its not. post up pics to to see the problem. also u got to tighten up the bolts to the max.
to post a pic u put it throught photobucket or tiny pic ect. and get the imgage code.

 

[Albyhouse]

Ah. Yeah, I know how to post pictures. But at the moment, I can't. I'll get some up tomorrow and edit my main post.

 

[Jeremy Dalgliesh]

alright also are the bolts really tight and were they hard to get in or did they just slide in?

 

[Albyhouse]

The first 5/16 I put in (Lowest spot, where the original bar was) was the biggest pain to get in. I had to use a hammer.

The 3/8 was meh. Didn't slide, but didn't use a hammer.

And the last 5/16 slide right through.

 

[Jeremy Dalgliesh]

umm... just post pics up when u can and that might tell us the problem..

where u from anyway?

 

[Rob.]

did you remove that little plate in front of the headtube? that works wonders

 

[Albyhouse]

http://www.youtube.com/watch?v=Ifsi9d_GBFw
Video of me just wobbling it.

I removed everything except the .. rod? where I put the 3/8 bolt goes.

 

[btyczki21]

smaller picsssss

 

[Albyhouse]

http://s301.photobucket.com/albums/nn45/not_joe_14/?action=view&current=DSCN1952.jpg
First three pics. Just click next to see them.
Happy?

 

[Jacek]

theres a Huge gap between the middle bolt and the headtube. when ur bolting it, hold that bolt so its touching the headtube as u tighten it.

and take off the plate in the front of the foldy with the 2 hex screws.

 

[Michael Rankin]

You have to unbolt that aluminum plate on the front of the foldy. Remover that and you'll be good to go.

 

[Albyhouse]

Ahh. Thanks.
I'm now wobble free.