Ultra pro plastic dropout inserts?

[Claytamous]

hey guys, you knows the plastic inserts that hold the wheel spacers in place? i kind of snapped them and something rubbing and making my scooter sound so bad and its just getting me so mad... is there any way i can get rid of the plastic pieces and put something else there? i tried to just use to two wheel spacers and it had a little room to wiggle from where the plastic was...

Thanks alot guys

 

[Crazy-Kyle18]

Ya i have this problem with the pro model

 

[revo]

just take some little washers and put them on both sides with your normal spacers so theres no wiggle. or get a grade 8 bolt and tighten it alot

 

[dpnelson31]

5/16 washers do the trick.

 

[Connorh333]

just use the metal ones and put a spacer on the outside. I find the inner ring to a broken bearing works the best.

 

[Dewey]

if u have an old razor pro, take the back wheel spacers off of that

 

[Scott Freibaum]

^^ they don't fit I have tried.

 

[AshleyPowell]

Just use the metal spacers without the plastic bits.
And change your axle to a bolt and nut and it will pull the dropouts to the spacers and tighten the wheel

 

[Darwin.]

i got my meatal spacers from a razor cruiser bearing spacer

 

[.Gerrit]

The razor a models that dont have the wheelie bar thing have wheel spacers that fit.

 

[Robert]

go to home depot, lowes or any hardware store pretty much and just get some spacers

 

[Claytamous]

thanks guys the 5/16s worked perfectly for it

 

[Hamish C]

use metal spacers or use the inside of broken bearings they're like the perfect dimensions.