would it be a waste?

S

sln1210

Member
would it be a waste to get a Razor Pro 08?
is the wheels the problem? cuz if thats the case then i can get different wheels. i just dont know why people hate them so much. the reviews written on some sites say they are the best, but you guys say they suck!

help??
 
S

SOA

Steel Member
all wheels break grant show us a model which has been used on scooter with out bad points as yet there isnt one :) end of story
 
MattThomMakesMeWarmInside

MattThomMakesMeWarmInside

Silver Member
Pro models wheels have a ridiculous rate of breaking even when you hotglue them they dont last so long. In the long run. Pro model is great. If you go somewhat big, even to the slightest get the deck reinforced. Slap some legit wheels on it. Thats it.
 
S

sln1210

Member
sorry mat, im new and i did search but didnt come up with anything that i found was what i needed to be explained.

thanks everybody for the replies, so i should get a pro but reinforce it and get different wheels?
 
J

jonnyq

Member
no if i were you i would stick to stock but bolt everything and glue the wheels.. if your just starting out you dont want it to be to heavy :)
 
S

Steven_T

Member
Listen to Peter, your still getting into riding. Get some new wheels, or at the most glue your pro wheels. And from there just bolt your folding mech. Maybe think about checking out some one piece bars. But no need to be reinforcing your deck just yet. Its only going to make your deck heavier, and make learning new tricks harder than it should be.
 
M

mike912899

Member
once u get the wheels hot glue em..... if you dont the cores will crack very fast.... even with hot glue they start to crack after couple of months or weeks..
 
S

scooters

Member
yeh the new pro wheels are shit, ive gone through like 15 pro wheels this year...they are shit and they are weak...but seem to last on the front good.......................the whole pro is starting to get weaker everytime i buy one
 
Jason

Jason

Silver Member
If you have a spare t-tube, cut a foot off it and cut a groove down the slot, then jam it in your fork. Last thing you want is a Pro fork only lasting 5 weeks.
 
Domsicle

Domsicle

Steel Member
LOL look at her trick list, she's not going to break anything anytime soon. Just get a pro model and stop questioning yourself.
 
G

gsp1179

Member
Domsicle said:
LOL look at her trick list, she's not going to break anything anytime soon. Just get a pro model and stop questioning yourself.
Click to expand...

Not necessarily. It depends on her strength and weight, for the most part. My friend broke two wheels and a fork before he could even tailwhip consistently.

Regardless, if she's on the tubby side, (145+ pounds) it's likely she'll break scooter parts regularly.
 
J

JDBen

BST Moderator
Staff member
ScootersOnly said:
all wheels break grant show us a model which has been used on scooter with out bad points as yet there isnt one :) end of story
Click to expand...

SR Metalcores

Boo Yah!
 
You must log in or register to reply here.
Top