Scooter parts advice

[Bear Grylls]

i like that deck,its like an old a and a mgp

exactly wat i was thinking haha

 

[Ham.]

How so

its like an old a comined with an mgp with razor pro looking bars

 

[chicken0207]

Could someone please give me the dimensions on a standard head tube to see if mine will work with standard razor forks.

 

[chicken0207]

Does no one know what the measurements are or where i can find them?

 

[Cole Jordan]

i have no idea

 

[Zaηe]

Integrated.

 

[sc00terJimmy]

Thats actually a stock clamp it had like a bunch of other shit on it that i took off and its welded on so should i grind the weld off and get a new clamp or what. Also what do you mean buy a one piece? Thanks for the compliments on the deck david.

Thanks for the advice

I found one of these at the tip and tried to salvage just the deck but, the headset's locked, did u have the same problems with trying to get the forks off?
The angle is crazy, its like 70 degrees.
The scooter came with forks that where attached to the bars, with two poles running either side of the headtube and connect down to the forks, which was the compression and prevented barspins and tailwhips.

Has any one else had or got one and please correct me if any of this information is wrong
I would post pics of it but, i don't know how to =P

 

[chicken0207]

ya it was like that and i can get the forks off i just need to know the measurement of the standard head so i can know if it will work with a new set of forks.

 

[sc00terJimmy]

How did u get the forks off? and just use headset spacers or cut the fork down.

 

[greg m]

is the deck one peice?

 

[nate-O.S.K]

i like the deck looks like a kno off mgp lol no offense of coure and btw when the hell did buffs go down to 65??????

 

[mdemoss]

i like the deck looks like a kno off mgp lol no offense of coure and btw when the hell did buffs go down to 65??????

when andrew decided to b gay and make them 1 1/4 insted of 1 3/8

 

[chicken0207]

the deck is a one piece and the forks are thread, there is a metal piece that covers the thread pictures later.