Umm, Help!

[Bennett_J]

So...
http://www.youtube.com/watch?v=41bhtfLcCqE

What the hell is going on!

 

[Hunter Treviranus]

sounds like u need new bearings,or your wheels are REALLY ovalized

 

[Bennett_J]

----- I literally have had them for like 2 days

 

[Creative]

blown up bearings..

 

[ConnorD]

...did you by any chance hammer in the bearings?

 

[Bennett_J]

Same with the bearings... FML
Whatever I will just ride it like this for awhile

And no, Shop ECX installed them for me

 

[BrandonWeir]

Sounds like you didn't put a wheel spacer in. Take your bearings out and check them over.

 

[Bennett_J]

I have one in there...

 

[Mikey G]

Well, what kind of bearings? Did you hit dirt with the bearings? That could be the grinding noise of a really dry bearing, a really dirty and grimy bearing, or there are like rocks in there and shiz. Most likely resulting in a really screwed over bearing.

 

[Bennett_J]

They are blunts, i will lube it up tomorow... I just bought it all so I really want it to work, A 40$ wheel is not something I can just trash

 

[Bennett_J]

any more advice?

 

[airplanes18]

carb cleaner.

 

[Bennett_J]

What?

 

[parrish]

take off the shields, theyre on there so that your bearings get fucked up and you need to buy new ones

 

[airplanes18]

or theyre meant to protect your bearings... but commonsense shant apply here.


just get carburetor cleaner and spray em down

 

[parrish]

no, cause when dirt gets in them it keeps it in there and makes your bearings scratchy, if them off, the dirt just gets filtered out

 

[Rob.]

Get some 3-in-1 oil, take the shields off, put the oil in the bearings.

are they blunt bearings? because that could be the reason too

 

[airplanes18]

no, cause when dirt gets in them it keeps it in there and makes your bearings scratchy, if them off, the dirt just gets filtered out

like i said. the sense youve applied here is annything but common

 

[Bennett_J]

Yes rob they are blunt bearings