How To Make A Baby SCS

[Robert Reichley]

What you need:
- a quad clamp to fit your bars (or just and oversized quad with a shim)
- bars with no slit
- a shim to fit between the clamp and your fork, and one for te bars (if needed)
- fork with a starnut in it
- compression cap

The Process:
- put your fork and headset on
- cut your fork(if necessary) so that when you put the clamp on it, theres still space in the top two bolts (for the bars to go)
- put the shim on the fork And tighten the compression cap.
- put the clamp over the shim (should only take up the space of the bottom two bolts)
- put your bars on
- tighten the 4 bolts and your ready to go!

Note: the thicker the metal on the clamp, the stronger it will be. But you probably knew that -__-

 

[toddjamin]

been done, and broke all number of clamps when people did it last year

 

[alexscooter]

gtfo

 

[Joe Riley]

gtfo

Why even post, shut up.

Anyway, this has already been discussed. People did it with Blunt clamps and they snapped.

 

[Robert Reichley]

My friend locally did it with a razor triple clamp and it lasted him a year and half, then he sold it and it worked for about another year after that