If you could make a fork yourself, what would it bel like?

[ChrisBrown]

For me, I always wish I could just easily customize parts with the snap of my fingers,and the one part that takes the most effort un thinking of is the fork. There are so many forks out there with crazy ideas and names that's I just can't seem to find an idea. What dream fork would you want ? Specs and all

 

[gjdadj]

1 solid piece of steel, the legs kinda like smx'es but 0 offset and thinner, and i'd want the fork bit not to be centered on the tube but facing 10 m forward, probably a weak design but mehh

to suit wheels upto 125 m and a 4 m thick tube

 

[haubyscoot8]

zero offset like inwards but with cutouts in the side and dropouts. so basically and inward/addict hybrid. as well it has to be compatable with any pegs

 

[Michael Osterlund]

something like a inward dagger fork but with mabey a cutout of a small dagger on sides.

 

[Anton]

Something between an addict dagger fork and the old french id forks.

 

[TomGeorge]

Basically razor forks that are zero offset, and fit 110 wheels.

 

[gjdadj]

my dream fork would be 1 piece steel and REALLY bulky except fot the fromt where there is a cutout for footjams kinda like trilogy forks, and it would have a hex hole like sacrafice forks, would have hundreds of well placed holes and cutouts, would have forktube cutouts like addict and would have a starnut with massive threads in it so that it wouldnt strip and ics bolt could pass through it, and it'd come with a heat treated graphite axle and compression bolt and starnut

another idea that might be kool? having the bit where the crown race attaches lined with thick rubber so when you land it absorbs a little bit of the impact? and also makes it easy to remove and install crown races? it sounds dumb but if you used even 5 mm of perfect hardness rubber and did a legit job it would absorb ALOT of impact and wouldnt be fully compacted by the compression but would be springey enough to keep the scoot dialled........ that is such a good idea! who understands what i'm talking about?

 

[Connorh333]

Aluminum with a solid tube. 6mm hole drilled and threaded hole for Hic/Scs.

 

[instinctscooter]

my dream fork would be 1 piece steel and REALLY bulky except fot the fromt where there is a cutout for footjams kinda like trilogy forks, and it would have a hex hole like sacrafice forks, would have hundreds of well placed holes and cutouts, would have forktube cutouts like addict and would have a starnut with massive threads in it so that it wouldnt strip and ics bolt could pass through it, and it'd come with a heat treated graphite axle and compression bolt and starnut

another idea that might be kool? having the bit where the crown race attaches lined with thick rubber so when you land it absorbs a little bit of the impact? and also makes it easy to remove and install crown races? it sounds dumb but if you used even 5 mm of perfect hardness rubber and did a legit job it would absorb ALOT of impact and wouldnt be fully compacted by the compression but would be springey enough to keep the scoot dialled........ that is such a good idea! who understands what i'm talking about?

I get ya, basically suspensionunder the crown race, might work

 

[Maz.]

Old frid design
10mm offset
125mm

 

[RiccardoM]

I already have my perfect fork.
Frid Monobloc
MAKES ME SO HAPPY!

 

[DavidBryson]

an ihc fork much stronger than the envy ihc. made out of something like chromoly

 

[JoshGscooter]

mine would be 0 offset smx but with flat edges rather than being circular but still curved at the shoulder of the forks

 

[Ajay Bryant]

smx v2 ihc

an ihc fork much stronger than the envy ihc. made out of something like chromoly

like an smx ihc the blunts arent that good i am riding one right now and i already want a new fork

 

[GingerNamedTravis]

125mm smx with a phorx-style thread in the top. 10mm offset

 

[Whip-Zonee]

Mix between Epic and tilt fork but zero offset with intergrated starnut and crown race

 

[callummm]

solid aluminum
fits 125mm wheels
removable starnut
cut out like apex
chunky design
anodized

 

[Hep Greg]

I already have my perfect fork.
Frid Monobloc
MAKES ME SO HAPPY!

i thought that too, until i snapped it

i know exactly what i want in a fork, but im not posting it. its too good.

 

[Frank T]

i thought that too, until i snapped it

i know exactly what i want in a fork, but im not posting it. its too good.

is this hinting at something... hep greg sig deck and fork?

 

[Victor C.]

Smx. But chromo. I keep breaking them and I have a thomcat now