switching from ICS to SCS

[AaronGidman]

In running ics on my scooter right now and I'm constantly tightening it and its extremely annoying to switch to scs do I just by an scs compression and take the starnut and bolt out of my bars and fork? Also, what scs would you recommend tilt or proto?

 

[CoryR]

get what looks nice to you, leave the starnut in your fork, thats all you need

 

[AaronGidman]

Thanks so just switch my clamp with the scs and I'm set?

 

[Dallen.]

Yes. Make sure your forks have a starnut in them. Put the scs over forks, tighten the bolt then put bars and tighten all the bolts. Easy

 

[AaronGidman]

Does it matter if my bars have slits? Cuz they do. And the starnut us in my bars and the rod bolt thing goes throught the bottom of my forks so I keep all of that the same?

 

[Whip-Zonee]

No You need to cut the slit off of your bars. Also no take the bolt out and the starnut in your bars, or you caan just leave the starnut in. But make sure theres a starnut i your forks, and you have to either cut the slit or put a piece of forktube/bar in the slit

 

[AaronGidman]

Ok thanks do you guys run scs or hic

 

[Anthσny]

How do you tighten your ics? Not asking anyone but Agidz.

 

[Michael Osterlund]

HIC
get the tilt.

 

[AaronGidman]

I tighten the bolt under the fork.

 

[Anthσny]

Do you losen your bars?

 

[Michael Osterlund]

take off the wheel and use the ics allen key to tighten the bolt right above where your wheel should go...

 

[AaronGidman]

Do you losen your bars?

Yes and I take my front wheel off too tighten the ics

 

[AaronGidman]

Then I allighn my bars and tighten them.

 

[Michael Osterlund]

resulting in a pain in the ass if you want to take your bars off...

 

[iliveinahouse1]

get the tilt SCS and cut the slit off, or put a bit of fork tube in your bars to cover up the slits.

 

[AaronGidman]

Will scs make my bars higher? Cuz if I cut them were the slit is they'll be way too small.

 

[AaronGidman]

resulting in a pain in the ass if you want to take your bars off...

Exactly why I want to switch to a different type of compression.

 

[Dallen.]

Tilt scs makes them 1 1/2 inches higher and a proto scs makes them 2 inches higher

 

[Michael Osterlund]

Buy oversized bars
Buy oversizedclamp
buy hic kit
put it together
your scooter will never come loose.
no need to take anything off.