Threadless Fork Help!

Sc00t3rin

Sc00t3rin

Member
Ok soo i am going to buy a French Id Fork, and i waz wondering if it is mandatory that u have to use a star nut or a special clamp like SCS, i already have threadless bars and i use a double clamp!...i hope i am clear on this!?
 
R

Ryan Kang

Bronze member
Sc00t3rin said:
Ok soo i am going to buy a French Id Fork, and i waz wondering if it is mandatory that u have to use a star nut or a special clamp like SCS, i already have threadless bars and i use a double clamp!...i hope i am clear on this!?
Click to expand...

you need a compression system.
 
C

Cody Appelhans

Member
Ics is internal compression system, like the kind that inward sells. You can find them in the sr store. Yes you have to use a compression system with a thredless fork.

p.s. 500th post
 
Sc00t3rin

Sc00t3rin

Member
razor pro said:
Ics is internal compression system, like the kind that inward sells. You can find them in the sr store.

p.s. 500th post
Click to expand...

NICE...but still not answered my question...can u use a double clamp on it??...i am gussing no right because the forks will pull out right!?
 
J

JarradSmith

Jarrad Smith (Gen Y)
Sc00t3rin said:
NICE...but still not answered my question...can u use a double clamp on it??...i am gussing no right because the forks will pull out right!?
Click to expand...
ICS is Inverted, not Internal.
Yes you use your clamp but you need the compression at the same time.
 
the_SD_local

the_SD_local

I own SR.
If you use an ICS (inverted compression system) you have to use a double clamp as well but you can not use a double clamp all by itself or your headset will loosen without the ICS keeping it tight. If you use an SCS, that is all you need. Both are compatible with FrID and both can be found in the SR Store and probably other places.
 
You must log in or register to reply here.
Top