1 piece bar help

M

mike912899

Member
ok lets say my 1 pieces are straight... clamped on really tight with a quad clamp... and like after 30 minutes of ridding they turn to one side so my wheel isnt straight.... its starting to anoying cuz it takes ages to make it straighter... this happened to anyone else? any idea to fix it? thanks
 
Z

zprestoe

Member
yeh its because the one pices are thinne r then stock
you have to comletely tighten it so it wont tighten anymore
my clamp is so tight the two sides touch each other.
tighten it with a foot or something
 
K

koenscoot

Member
Yeah man, when I had my noctornal bars i tightened the sh!t outta the clamp and there was no movement at all, solid as. then they bent,.
 
G

gerkin of honour

Member
yeah seasoned bars need to be clamped real tight along with alot of other one pieces, or you can just whack the front of you wheel against a wall and it straightens again.
 
J

JonnyJonDogg

Member
my rob forman bars done this for weeks, then i got my oversized starnut and IT IS OOOO SOOO NICE seriously get a compression system then the clamp actually works :)
 
M

molewood4

Member
i used a micro clamp with my wee's and i had to stretch it al ot and put big headset bolts in it and tightened the f@@k out of eet.
 
R

Ryan Murray

Member
just fing the thinnest peice of metal like sheet metal and cut it to the sixe of ur dub clamp as in it goes in ur dub clamp...then just put on ur bars and start bending it so it takes the shape of the outer rim of ur bars...thn u may need to stretch ur dub clamp to put it around the pars and the shim..thn tighten it as tight as u can
 
R

Ryan Murray

Member
just fing the thinnest peice of metal like sheet metal and cut it to the sixe of ur dub clamp as in it goes in ur dub clamp...then just put on ur bars and start bending it so it takes the shape of the outer rim of ur bars...thn u may need to stretch ur dub clamp to put it around the pars and the shim..thn tighten it as tight as u can
 
J

jake606

Bronze member
Apple iZackk. said:
yeh its because the one pices are thinne r then stock
you have to comletely tighten it so it wont tighten anymore
my clamp is so tight the two sides touch each other.
tighten it with a foot or something
Click to expand...
that or if you have reinforced forks and you snap your forks but not the reinforcement the bars will twist on the reinforcement
 
You must log in or register to reply here.
Top