.

[JohanGrunwald]

.

 

[Jason]

SCS and Frid forks don't mix. Sorry dude.

 

[JohanGrunwald]

SCS and Frid forks don't mix. Sorry dude.

No it works fine. Just ask Jon Dogg. FID just sucks!

 

[JDBen]

haha xD

 

[Matthew Madera]

Sr has a fix for it, all the people who purchased from SR will not have this glue issue

 

[dezbert]

Look in the French ID Discussion thread.....Jon Meadows has a tutorial for this problem.

 

[Big L]

FrenchID is bomb actually, just need a pinned fork with a scs, easy fix.

 

[dezbert]

Yupp^^^

It's easy, and will solve the problem

 

[JonnyJonDogg]

SCS and Frid forks don't mix. Sorry dude.

No it works fine. Just ask Jon Dogg. FID just sucks!

YES

been riding my frenchid fork and scs for so long, still feels amazing

 

[blaine142]

u could hit the fork tube down in the fork with a rubber mallet and get it welded with like 2 beads on each side and it wont move just like how a razor fork is welded

 

[JonMeadows]

PIN=WIN!

How To Pin A FrID Fork

You Need:
-One 3/16 x 2 "tension pin"
-Drill Gun
-11/64 Drill Bit

Step 1: Using your drill gun and 11/64 drill bit start to drill a hole at the top of the "D" on
the front side of the fork.
Step 2: Drill a straight hole all the way through until you reach the other side.
Step 3: Hammer the 3/16 "Tension" pin into the hole until it reaches the end.
Step 4: Cut off the excess pin and sand until smooth.

Hope it Helps!!!


PROBLEM SOLVED!

 

[FestonGross]

what is a tension pin?