Anyone cut tilt nimbus to fit ethic decks tilt scs

[Cole]

Anyone cut tilt nimbus to fit ethic decks while using a tilt scs and a tilt headset. if do how much did you cut off.

 

[Devin DePriest]

I'm pretty sure you don't have to cut it...

But if you do... I would use spacers

 

[Cole]

okay thx

 

[TomK]

You will need a spacer. Do not cut it, or you will remove the threads and need to put in a starnut.

 

[Flocka]

^ what Tom said. But if you do decide to cut it you would probably have to cut off all the threaded part and run inverted SCS, like run an ICS bolt up through the bottom of the fork and into the middle of your scs but that wpuld most likely make your fork too short.