Axel getting loose

[jcole1234]

Ok on my 110 vapor in the front my axel keeps getting loose and its a pain to keep having to tighten it but still be able to move.... what should i do to keep my axel from getting tight but still be able to move???

 

[-Sal-]

get a new axel or take out the bearings and check the spacer.

 

[idk47]

Get a 2 inch 5/16 bolt + 2 washers and hacksaw the rest off.

 

[tize]

if you had a spacer between your bearings in your wheel you could tighten your axle... If you havent figured this out already you might just be retarded.

 

[Jake ODonnell]

make sure you have a spacer

 

[matthewcarbotti]

cooleman just come over to m y house tomorrow i'll fix it for u.

 

[ben-pat-bro]

if u dont wanna use a bolt use some locktite

 

[Tylerr.]

Mine did that to me and i just use a few small washers.
just bring your tools when you ride too.

 

[Bandana]

ya just put a washer on each side and you should be good

 

[Mike Montgomery]

locktight would work.

 

[jcole1234]

where do i get locktite stuffsz??

 

[vadar jam]

The Locktite headquarters....jk any hardware store will have it or a hobby shop

 

[jonny scoot]

i think the pluming sealant woks quite well, if you put it on right

 

[charles]

On the top clamp of stock bars.
take the clamp apart you will find a small spacer.
it fits over the male part of the axle but not the female.
put the spacer bewtween ur bearing and fork.
WORKS BEST