Back Pegs.

[JSkillet26]

Ok i searched, but the search function doesnt work very well. how do you make back pegs for a razor pro with bearings

 

[Aaron]

Find a bolt that is the same width as the scooter axle, and longer than 10cm (?) For every bearing you want to put on it, make it 1cm longer.

 

[alexiorio]

Or just get a steel 5/16" thick bolt that's like a half inch longer than it should be if you didnt have pegs, and put a half inch socket on the hex head part of the bolt.
But I'm an OG, I have no pegs, just do grinds on my axle nuts haha

 

[Rob.]

Scooter modding super thread.

 

[JSkillet26]

Scooter modding super thread.

it doesnt say how to make back pegs

 

[lloyd]

buy one http://www.qcscooters.com/pegs.html

 

[reuben furzedown]

Just get a longer bolt than the stock, i have a back peg with 4 bearings and i used the the back axel from my extreme sprite which i broke and it works cool, all you need is a longer bolt and preferably self locking nuts

 

[willywoghead]

i just use a normal pro axle, and use a spare lower bar clamp bolt, then put bearings on that and into the axle it goes

 

[scootcb]

I just got a threaded rod and 2 bolts and cut it to wear i needed it...really simple...and works great..

 

[reuben furzedown]

yeah do what mike said that sounds good i have some rod in my room but it is 6mm not 5mm which is needed for axels.

 

[asianpuff16]

I just got a threaded rod and 2 bolts and cut it to wear i needed it...really simple...and works great..

i was thinkin of doin that but

 

[scootcb]

I just got a threaded rod and 2 bolts and cut it to wear i needed it...really simple...and works great..

i was thinkin of doin that but

do that it works really good just make sure when ur cutting it you dont melt the threads. But yeah they come unloose sometimes but its pretty good...and the wheels run pretty good on it...i never check if i hurt my bearings from the ridges of threads into my bearings but probably not.

 

[JSkillet26]

thanks, anymore ideas?

 

[rocket2530]

buy em from hq