bars stuck

[tyler jordan]

ok so i use ics with a lsv3 and lucky buffs with lucky clamp...i loosened the clamp so the bolts are off. i took the ics bolt out. but the bars will barley spin and wont come off when pounding them and stomping the deck. and yes they have a slit. they went on easy.

does anyone know how to take them off

 

[ConnorD]

it could be the clamp, not sure though. some clamps, even if you take the bolts out, are still tight because they bend in alot ( not a bad thing) so try taking the bolts and putting them through the other side of the clamp, where the threads are, and put a penny in the slit in the clamp, and tighten it. it should loosen it, and hopefully itll work

 

[JoshNunez]

stretch the clamp a lil bit

 

[tyler jordan]

its not the clamp the clamp slides up and down its not tight at all

 

[Rob.]

put a hammer between the fork and lodge it up against the deck and spin it off
thats what i do when bars stick or are hard to take off

 

[DJ Lee]

i had to do this alot, u can just take ur front wheel off, stand on the deck and wiggle the crap out of the bars back and forth and then twist them off once it gets easier

 

[tyler jordan]

I've done it all. We put the front wheel inbetwren to mettle bars and spun and it like literally will not even spin

 

[DJ Lee]

do it harder. ur not committing

 

[tyler jordan]

trust me i have ive swung it as hard as i can so the back wheel and deck hit a wall and they bars still wont budge

 

[tylerbillman]

Don't hit a wall. Just get your dad or stronger elder to help you, no biggie.

 

[DJ Lee]

it seriously cant be that hard how did the bars get on there in the first place?

 

[2468]

Rubber mallet under the cross bar

 

[Isaac Coy]

just rip, rip, rip them off.