Bearing Race Stuck! (PIC)

[JoshNunez]

http://s815.photobucket.com/albums/zz75/Chondoman/?action=view&current=IMG_4260.jpg



I cannot figure how to get it out

Please help

 

[parrish]

i did u the favor of posting the pic
and just stick a flathead screwdriver or something like that in there and pry it out that should work just fine

NOW SOMONE PLEASE LOCK THIS BEFORE IT GETS BUMPED LIKE A BILLION TIMES!!!!

 

[Anthσny]

It happend to me i got the other one out then hit it from the inside with a screwdriver and a hammer a couple time everywhere and there you go.

 

[Anthσny]

i did u the favor of posting the pic
and just stick a flathead screwdriver or something like that in there and pry it out that should work just fine

NOW SOMONE PLEASE LOCK THIS BEFORE IT GETS BUMPED LIKE A BILLION TIMES!!!!

srry we bumped at the same time

 

[Tony Ebbert]

Put an Allen wrench or a flathead screwdrive in the side without a bearing race then use a hammer to hit it out.

 

[JoshNunez]

Ok, sorry but I am talking about the bearing race on the top

I have tried the flat head screw driver and allen wrench but it is not working.

 

[parrish]

ill take it

 

[nitroRCs]

I think his problem is, if you look at the pic, there is no room to get a screwdriver in there to hit it out. I duno how you would get this one out..... Maybe cut it?

 

[Zaηe]

Get the right tools, and get persistent and patient.
Do it on top of a vice with a hammer and screwdriver.

 

[jordyskoots]

yea use a flatty screw driver or a punch... what kind of wheel is that??

 

[DavidCronin]

use a skatebaord truck and pry it out

 

[JoshNunez]

Thanks for all the help and nitroRCs was the only one who got it right, there is no space to hit it out.

Im just going to take to the Proride shop and see what they can do :/

p.s. its a proride wheel

 

[tyler jordan]

there is a little lip on the bearing rac the is enough for u to hit...u use a small flat head not a big one

 

[Rob.]

find a super strong electro magnet, hold down the wheel and let the magnet do it's work
since the wheel is aluminum it should pull the race out easily.

if you can't do that I suggest using a small screw driver and either hitting it out from the other side (pop the other bearing out) or pry it out from the side it's stuck in

 

[DavidCronin]

if you have a skateboard truck it will take atleast 2 seconds to do