bolt set sizes

[tCol]

i wanna get a bolt set for my razor pro but i cant find them anywhere online so i was wondering what sizes the bolts are so I could just buy them from like home depot or something.

 

[Zaηe]

Home depot, just keep putting bolts through till you find the one that fits/works and buy 3 of them.
Some smartass will post the proper dimensions though.

 

[Michael Rankin]

This smartass is going to say "search"

 

[c.roman]

http://www.luckyscoot.com/scooter_handbook_detail.php?catid=262&id=10

 

[Zaηe]

This smartass is going to say "search"

This is the smartest ass in the world.

 

[Remco]

bottom:
5/16" bolt 2 1/2" or 2 3/4"

Middle (behind the headtube)
3/8" bolt 2 1/2 or 2 3/4"

Top (through the headtube)
3/8" bolt 2 1/2 or 2 3/4"

This fits with a little bit of grinding doing to the foldy rails and headtube. This way you'll have the steepest headtube angle (about 82-83 degrees) while having the most solid foldy possible.

 

[Rob.]

I'll be a dumb ass and post my normal bolt set:

All bolts are 2-3/4ths long
5/16ths through bottom hole
5/16ths through headtube
3/8ths behind headtube.

Solid. Good headtube angle too (like 81-82)

 

[Jossy]

2x 5/16"
1x 3/8"
or you could weld it if you have access to an alu welder. much quicker and better

 

[Zaηe]

2x 5/16"
1x 3/8"
or you could weld it if you have access to an alu welder. much quicker and better

No.