Bolt stuck in starnut.

[Derek Seay]

I got a pair of phoenix forks from a friend. They have a bolt that snapped and got stuck in the integrated starnut. How do i go about getting it out. I hate my tilt forks with a fiery passion.

 

[yoyoflavored]

Allen key and cheater bar?

 

[Derek Seay]

Sorry, i didn't state the entire problem.

The bolt snapped inside.

 

[Robert]

take a small allen key or something like that
put a tiny bit of super glue on the end of the allen key
stick the allen key onto the bolt
wait for it to dry
screw the bolt out

edit: make sure you dont use too much super glue otherwise it will get into the threads

 

[Derek Seay]

The bolt is snapped inside of it. There is no head.

 

[Robert]

The bolt is snapped inside of it. There is no head.

ya thats why you use super glue its to make the allen key stick to the screw so you can screw it out

 

[Derek Seay]

I have feeling that superglue isn't gonna be strong enough.

 

[Robert]

i've done it and it works

it depends on how much you use and how deep the star nut is

 

[alexallupinthis]

drill it out and hammer an other one in through the bottom?

 

[Michael Osterlund]

put an ics bolt through the bottom and tap it out with a hammer. not sure if it would ruin the starnuts threads...

 

[Robert]

put an ics bolt through the bottom and tap it out with a hammer. not sure if it would ruin the starnuts threads...

it would

 

[Derek Seay]

Im getting easy outs tommorow. Hopefully i can get it out.

 

[yoyoflavored]

Good luck dude! hope you get it out!

 

[gjdadj]

I got a pair of phoenix forks from a friend. They have a bolt that snapped and got stuck in the integrated starnut. How do i go about getting it out. I HATE MY TILT FORKS WITH A FIREY PASSION.

WHY!!!!! no!!!!!

i'd superglue a alan key to the reminants of the bolt and tiwst it out, easy