BOLTING THE 2008 PRO MODEL

[Scooterproman]

Man it took me hours to figure out how to bolt the 2008 pro and to save you the hassle, the bolts you will need and their locations are:

3/8'' x 3'' which goes in the hole nearest the brake

8mm x 70mm (metric) which goes in the bottom hole

5/16'' x 3'' which goes in the hole nearest the front wheel, you will also need two washers for each bolt

And how to do it IN ORDER is the 8mm x 70mm, then unscrew the thing that stops the headtube its hard to explain without a picture you know the thing in front of the foldy and its connected to the two foldy supports, and once its backed out a little you put in the 3/8'' x 3'' which is a little bit of a hassle but it will work, and then the 5/16'' x 3'' which will probably also be a little bit of a hassle but it will work! Well i hope this helps.

 

[Eat Joo Food]

bolting it is like the same as old pros broski

and no i didnt get that at all but mine is bolted

 

[JonnyJonDogg]

arent they exactly the same as the old decks?

 

[Steezeman]

Man it took me hours to figure out how to bolt the 2008 pro and to save you the hassle, the bolts you will need and their locations are:

Nice work, Scooter pro man.

 

[DMazz]

i jus put my old bolts from my past pro model on and it worked fine??

 

[dre]

Man it took me hours to figure out how to bolt the 2008 pro and to save you the hassle, the bolts you will need and their locations are:

Nice work, Scooter pro man.

lmao

 

[rapkid]

Man it took me hours to figure out how to bolt the 2008 pro and to save you the hassle, the bolts you will need and their locations are:

Nice work, Scooter pro man.

lmao

hours... takes about 5 min

 

[Tylerr.]

Man it took me hours to figure out how to bolt the 2008 pro and to save you the hassle, the bolts you will need and their locations are:

Nice work, Scooter pro man.

lmao

haha that made me laugh

 

[alexiorio]

Man it took me hours to figure out how to bolt the 2008 pro and to save you the hassle, the bolts you will need and their locations are:

Nice work, Scooter pro man.

lmao

hours... takes about 5 min

I was in a bigggg hurry once, I seriously did it in about two.

 

[scooter27]

wait wats the dif. beetween the 07 and the 08 pro except the fork?

 

[Jake ODonnell]

wow.
SR is dead.

 

[Sshields32]

deader then dead jake. its like. extinct.

 

[theworm]

search you fuckin noob
this needs to be locked

 

[Jordan Jasa]

alright, i've never really said anything about this, but why the --- would you go through all that trouble to get precise sizes of bolts, to even go to the store and get bolts? why doesn't anyone use axles and bearings anymore? i use them and its perfect, simple, and looks good. and i didn't pay a cent for them. and you can push the bars up a bit if you like the high headtube angle (which i think is another dumb trend).

 

[ScootingFred]

Yes axles are easy, but they can't be anywhere near as tight as a nut & bolt.

 

[alexiorio]

Yes axles are easy, but they can't be anywhere near as tight as a nut & bolt.

They can be if you use the right ones.

 

[ridescoot14]

u had a good intention but your a tard because it took me a minute and that was finding the bolts

 

[Chris Picone]

Man it took me hours to figure out how to bolt the 2008 pro and to save you the hassle, the bolts you will need and their locations are:

Nice work, Scooter pro man.

I can imagine if I didn't have the sizes on the Internet it might take me like 3 minutes at a hardware store to fit the bolts in. Maybe 5 minutes. Did you really sit there for hours trying to figure out where the bolts go? That's pretty sad...

 

[ben-pat-bro]

lmao this kid kidding right?????

 

[jonny scoot]

hahaha!!!