BRASS KNUCKLES

[christian mesa]

andrew will these be availiable for aussies through shq i hope so its soo smart and such a good idea

 

[Scooter Mcgee]

do etttttttttttt

oi inward forks are way fuckingg overpriced

 

[christian mesa]

i no. imagine what srs will be

 

[JonnyJonDogg]

protos wil be worth it though

 

[SOA]

SOA will stock the new compression system very soon, also the proto wheels once bck instock, bars are harder to stock at moment trying to work on it

 

[Jon.]

how do you ut the starnut in?

 

[Lil Steve]

how do you ut the starnut in?

With a hammer.

 

[Josh Herman]

so do buffs fit on the clamp

 

[Madis]

They're gonna be on WEE too.


Weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee!

 

[Jon.]

when?

 

[yakscoot125]

I see a couple of flaws in the design, but there only from not having all proto parts. If you have a longer forktube than an sr fork, the quad clamp will be raised right? well then you have to buy a bunch of bmx spacers and stuff to make it fit correctly, this in turn means you have to either cut your bars down, or order new ones to compensate for the height difference of the forktube. I expect Andrew will come in here so hopefully he can answer if any of these problems are even problems, or if they can be fixed. btw im not trying to sound like a douche i love the idea so far, i just would like it to be compatible with my parts

 

[Joe Riley]

i posted that in a comment on the news page. idk if he saw it/will see it, though.

 

[Josh Herman]

so do buffs fit on the clamp

 

[Taylor Feist]

yes they do as he said

 

[Matt]

I see a couple of flaws in the design, but there only from not having all proto parts. If you have a longer forktube than an sr fork, the quad clamp will be raised right? well then you have to buy a bunch of bmx spacers and stuff to make it fit correctly, this in turn means you have to either cut your bars down, or order new ones to compensate for the height difference of the forktube. I expect Andrew will come in here so hopefully he can answer if any of these problems are even problems, or if they can be fixed. btw im not trying to sound like a douche i love the idea so far, i just would like it to be compatible with my parts

All you have to do is cut the bottom down two inches

Your bars no longer need slits so you just cut them off and it will work

 

[Madis]

I see a couple of flaws in the design, but there only from not having all proto parts. If you have a longer forktube than an sr fork, the quad clamp will be raised right? well then you have to buy a bunch of bmx spacers and stuff to make it fit correctly, this in turn means you have to either cut your bars down, or order new ones to compensate for the height difference of the forktube. I expect Andrew will come in here so hopefully he can answer if any of these problems are even problems, or if they can be fixed. btw im not trying to sound like a douche i love the idea so far, i just would like it to be compatible with my parts

Anybody who has produced threadless forks haven't made a fork with a tube being too long.
As for the bars, you have to cut your bars 2 inches shorter so they would be at the same height again, the cut doesn't even have to be 100% straight. And you won't have to cut slits in. I sawed my bars by hand so mine are not even straight at the bottom, but it doesn't matter.

 

[Mark Abramsky]

what if u have threadless inwards with the extra long fork tube cuz u can get that

 

[Madis]

Why would you wanna get a longer forktube? Just to gain weight?

 

[konowaluk]

so dose it make your bars any higher
and will it work with buffs

 

[Brian Boston]

what if u have threadless inwards with the extra long fork tube cuz u can get that

If its too long just cut it yourself