Dial an RUP?

[shelscoot13]

i have an ultra pro deck and i can't seem to get it dialed. I've gotten a threadless headset, new wheels, and used rubber to dial the brake. Please help.

 

[parrish]

an brake on an rup is hard to an dial

 

[short_bus_Scooter]

i have a dialed one, its got a switchblade on it tho. make sure everything it tight and not wobbly

 

[yoyoflavored]

^^^ i want a switch blade on my rup, but its cracking :/

 

[DavidCronin]

tighten everything to the point were it just barely spins... and for brakes... pennies,dimes or nickles

 

[airplanes18]

get a flexxy

make sure your wheels dont do any motion but spin. no rocking around.

headset tight. sold bars.

if it still rattle than you got issues

 

[scootertoot64]

after you put your clamp on your bars. hammer em down. the tighten. dialed my pro mod

 

[BrandonWeir]

If your brake spring isn't extremely tight, then put a lego or a bearing under it. Then fill the spring and coat it with hot glue so there's no spring metal clanging on any other metal. Put rubber in between the brake and the deck. It'll take some tinkering.

Other than that, make sure everything is tight.

 

[shelscoot13]

i put a piece of a grip in between the brake and deck and used a quater and it kinda worked. also i'm gonna order a switchblade.